Air & Dirt Separator
- PN10 · PN16 · PN25
- 0 to 120 °C
- Low pressure drop
Denwor air separators are of the centrifugal type, designed to work in HVAC systems to remove entrained air. The centrifugal flow creates a low-pressure vortex in the centre of the tank, where entrained air comes out of solution.
The freed air floats to the top of the tank, where it is easily removed through an air vent, while the water carries on with only a low pressure drop.
Simple, step by step
Water enters
System water flows into the separator body and is set spinning.
A vortex forms
The spin creates a low-pressure vortex in the centre of the vessel.
Air separates
Entrained air and micro-bubbles come out of the water in the low-pressure zone.
Air is vented
The air floats to the top of the tank and is removed through an air vent. Air-free water flows on.
Features
- Removes entrained air to protect the system against damage, give better heat transfer, reduce energy costs and eliminate system noise
- Centrifugal flow creates a low-pressure vortex in the centre of the tank while keeping pressure drop low
- Available in PN10, PN16 and PN25 pressure ratings
- Working temperature 0 to 120 °C
Benefits
- Removes entrained air and micro air bubbles
- Increases the efficiency of the system
- Reduces the chances of air lock
- Increases the efficiency of heat transfer
- Increases the life of pipelines and equipment
Key specifications
| Type | Centrifugal air separator |
|---|---|
| Pressure rating | PN10, PN16, PN25 |
| Working temperature | 0 °C to 120 °C |
| Air release | Air vent at the top of the tank |
| Pressure drop | Low |
Need a size or rating that isn't listed? Ask our engineers.
Where it's used
- Chilled water systems
- Heating (hot water) systems
- Closed-loop HVAC circuits
- Process cooling water
Other products
Expansion Tanks
Pressurization Unit
PanelsInterested in the air & dirt separator?
Send us your requirement and our experts will get back to you with the right size and price.